Alphabetic List of SCPI Commands

This list represents the available SCPI commands in alphabetic ordering. Keywords in brackets ([]) are optional. A complete description is presented in the above documentation. Available abbreviations are written in capital letters.

Command	Description
*CLS	clear all status data and the error queue
*ESR	event status register
*IDN	device identity, (vendor, type, serial, firmware version)
*RST	resets all user settings and purges user reference data
CONTrol:INDicator:STATus	control status led
CONTrol:INPut:EMITter:CONFig:COUNt	number of spectral samples to be returned
CONTrol:INPut:EMITter:CONFig:FORMat	spectral sample output format
CONTrol:INPut:EMITter:CONFig:FREQuency	sample rate for emitted spectra
CONTrol:INPut:EMITter:CONFig:FREQuency:UNIT	unit of the frequency
CONTrol:INPut:EMITter:CONFig:PROCessing	processing steps for emitted spectra
CONTrol:INPut:EMITter:CONFig:ROI	region-of-interest definition for emitted spectra
CONTrol:INPut:EMITter:DESTination	destination address of the emssion
CONTrol:INPut:EMITter:SAMPles	stored triggered samples
CONTrol:INPut:EMITter:STATus	current emission status
CONTrol:INPut:EMITter:STATus:ECOunt	current number of emitted spectra
CONTrol:INPut:EMITter:STATus:RATE	current spectra emission rate
CONTrol:INPut:EMITter:STATus:LOG	brief log of the emitting eventys
CONTrol:INPut:EDGE	detectable signal transition on the input
CONTrol:INPut:LEVel	query the current input level
CONTrol:MANual:EMITter:CONFig:COUNt	number of spectral samples to be returned
CONTrol:MANual:EMITter:CONFig:FORMat	spectral sample output format
CONTrol:MANual:EMITter:CONFig:FREQuency	sample rate for emitted spectra
CONTrol:MANual:EMITter:CONFig:FREQuency:UNIT	unit of the frequency
CONTrol:MANual:EMITter:CONFig:PROCessing	processing steps for emitted spectra
CONTrol:MANual:EMITter:CONFig:ROI	region-of-interest definition for emitted spectra
CONTrol:MANual:EMITter:DESTination	destination address of the emssion
CONTrol:MANual:EMITter:RUN	start of manual spectral data emission
CONTrol:MANual:EMITter:SAMPles	stored emitted samples
CONTrol:MANual:EMITter:STATus	current emission status
CONTrol:MANual:EMITter:STATus:ECOunt	current number of emitted spectra
CONTrol:MANual:EMITter:STATus:RATE	current spectra emission rate
CONTrol:MANual:EMITter:STATus:LOG	brief log of the emitting eventys
CONTrol:OUTPut:DELay:END	delay between measurement end and output level change
CONTrol:OUTPut:DELay:END:UNIT	unit of the end delay
CONTrol:OUTPut:DELay:STARt	delay between level change and start of sampling
CONTrol:OUTPut:DELay:STARt:UNIT	unit of the start delay
CONTrol:OUTPut:ENABled	toggle output control on level target event
CONTrol:OUTPut:LEVel:TARGet	output level during measurement
CONTrol:OUTPut:SOURce	event source selection to control the output line
DEVice:CONSumption:CURRent	current consumption
DEVice:CONSumption:CURRent:UNIT	unit of the current consumption
DEVice:CONSumption:POWer	power consumption
DEVice:CONSumption:POWer:UNIT	unit of the power consumption
DEVice:CONSumption:VOLTage	voltage consumption
DEVice:CONSumption:VOLTage:UNIT	unit of the voltage consumption
DEVice:SPECtrometer:ARRay:PCOunt	number of pixel in the built-in spectrometer
DEVice:SPECtrometer:ARRay:PEAK	peak value for pixel intensity
DEVice:SPECtrometer:BACKground:OFFSet:VOLTage	spectrometer offset voltage
DEVice:SPECtrometer:BACKground:OFFSet:VOLTage:DEFault	spectrometer default offset voltage
DEVice:SPECtrometer:BACKground:OFFSet:VOLTage:MAXimum	spectrometer maximum offset voltage
DEVice:SPECtrometer:BACKground:OFFSet:VOLTage:MINimum	spectrometer minimum offset voltage
DEVice:SPECtrometer:BACKground:OFFSet:VOLTage:UNIT	unit of the offset voltage
DEVice:SPECtrometer:CONNector	connector type (FC or SMA)
DEVice:SPECtrometer:PIXels:SENSitivity	sensitivity values for each pixel
DEVice:SPECtrometer:PIXels:WAVelengths	wavelength values for each pixel
DEVice:SPECtrometer:PIXels:WAVelengths:RESolution	spectrometer resolution
DEVice:SPECtrometer:PIXels:WAVelengths:RESolution:UNIT	unit of the spectrometer resolution
DEVice:SPECtrometer:PIXels:WAVelengths:UNIT	unit of the wavelength values
DEVice:SPECtrometer:SERial	spectrometer serial
DEVice:TEMPerature:BOARd	temperature value from the center of the main board
DEVice:TEMPerature:BOARd:UNIT	unit of the mainboard temperature
DEVice:TEMPerature:ENCLosure	temperature value of the enclosure
DEVice:TEMPerature:ENCLosure:UNIT	unit of the enclosure temperature
DEVice:TEMPerature:SPECtrometer	temperature value provided by the spectrometer head itself
DEVice:TEMPerature:SPECtrometer:UNIT	unit of the spectrometer temperature
DEVice:TEMPerature:SUBBoard	temperature value of the spectrometer sub board (close to the spectrometer)
DEVice:TEMPerature:SUBBoard:UNIT	unit of the subboard temperature
HELP	helpful description of each command
MEASure:SPECtrum:AVERage:NUMBer	moving average number value
MEASure:SPECtrum:AVERage:NUMBer:DEFault	default moving average number value
MEASure:SPECtrum:AVERage:NUMBer:MAXimum	maximum moving average number value
MEASure:SPECtrum:AVERage:NUMBer:MINimum	minimum moving average number value
MEASure:SPECtrum:EXPosure:TIME	exposure time of the spectrometer
MEASure:SPECtrum:EXPosure:TIME:DEFault	default exposure time of the spectrometer
MEASure:SPECtrum:EXPosure:TIME:MAXimum	maximum exposure time of the spectrometer
MEASure:SPECtrum:EXPosure:TIME:MINimum	minimum exposure time of the spectrometer
MEASure:SPECtrum:EXPosure:TIME:UNIT	unit of the exposure time
MEASure:SPECtrum:REFerence:DARK	dark spectrum
MEASure:SPECtrum:REFerence:DARK:ACQuire	sample dark spectrum based on a provided average number
MEASure:SPECtrum:REFerence:DARK:SET	sample or retrieve the dark spectrum (optional number of averages for sampling)
MEASure:SPECtrum:REFerence:LIGHt	light spectrum
MEASure:SPECtrum:REFerence:LIGHt:ACQuire	sample light spectrum based on a provided average number
MEASure:SPECtrum:REFerence:LIGHt:SET	sample or retrieve the light spectrum (optional number of averages for sampling)
MEASure:SPECtrum:REQuest	spectral sample with applied configuration and processing
MEASure:SPECtrum:REQuest:CONFig:COUNt	number of spectral samples for a single request
MEASure:SPECtrum:REQuest:CONFig:FORMat	spectral sample output format
MEASure:SPECtrum:REQuest:CONFig:FREQuency	sample rate for spectral sample response
MEASure:SPECtrum:REQuest:CONFig:FREQuency:UNIT	unit of the frequency
MEASure:SPECtrum:REQuest:CONFig:PROCessing	processing steps for each spectral sample
MEASure:SPECtrum:REQuest:CONFig:ROI	region-of-interest definition for sample request
MEASure:SPECtrum:REQuest:RAW	raw spectral sample
MEASure:SPECtrum:SCALe	scaling vector for spectrum
MEASure:SPECtrum:SCALe:DEFault	default scaling vector (equal to the sensitivity)
SYSTem:ACTion:REBoot	reboot the Spektralwerk device
SYSTem:COMMunicate:NETWork:CONFig:IPV4	network address of the device
SYSTem:COMMunicate:NETWork:HOSTname	a custom host name for the identification of the device
SYSTem:COMMunicate:NETWork:MAC	mac address of the device
SYSTem:ERRor[:NEXT]	last occurred error
SYSTem:ERRor:ALL	list of all occurred errors
SYSTem:ERRor:COUNt	current number of errors in the error queue
SYSTem:FIRMware:UPLoad:BLOCk	upload firmware chunk
SYSTem:FIRMware:UPLoad:STATus	firmware upload status
SYSTem:FIRMware:UPLoad:VERSion	firmware version of the current upload
SYSTem:FIRMware:RECovery:UPGRade	upgrade the recovery firmware to the current firmware version
SYSTem:FIRMware:RECovery:ROLLback	rollback firmware to the recovery firmware
SYSTem:FIRMware:RECovery:VERSion	current recovery firmware version
SYSTem:FIRMware:VERSion	current firmware version
SYSTem:SCPI:COMMands:VERSion	SCPI command version
SYSTem:SETTings:CLIent	client reserved storage location
SYSTem:VERSion	SCPI command standard